Germany Site
English   |   German     
Registered User   |   My Cart My Product List   |   Contact Us 
  |   Imprint   
ELMA
Search    
Complete housing solutions and components for the electronics manufacturing industry
Skip Navigation LinksElma > Accessories

Accessories

Power Supplies


  • Superior high efficiency up to 83%
  • Operation temperature range -10°C - +55°C with no derating
  • "Hot-swap" and current sharing features for N+1 redundant connection
  • No minimum load requirement
  • Standard 47 Pin per PICMG
  • Active power factor correction
  • MTBF: > 400.000 hours per Bellcore
  • Worldwide Safety approval including UL, CSA, TÜV and CE marking
  • Remote sense on +5.0 & +3.3 outputs
  • Inhibit & Power OK per PICMG 2.11
  • Green LED on front panel for outputs OK, red LED for power supply failure
  • DEG# signal: TTL compatible signal
  • I²C Data Bus
Datasheet/Brochure
Pdf 3U 200W AC/DC
Pdf 3U 200W DC/DC
Pdf 6U 400W AC/DC
Pdf 6U 400W DC/DC

More Info/Accessories



System Monitor ECO


System Monitor OnlinePRO

The SysMon OnlinePro is a platform independent system monitor for monitoring internal system conditions including temperature, voltage, fan rotation or power supply. The system monitor uses a 16-bit microcontroller with integrated 12-bit A/D converter. It has also a built-in web page allowing the user to monitor the system operation from any place with Internet connectivity. For fans with PWM regulation only!
System Monitor ECO Plus


VPX Test Extender

The VPX extender boards are designed to bring a circuit card completely out of a card cage or enclosure so that it can be tested or debugged. This provides access to both sides of the test board. There are test points for all of the differential pairs on the MultiGig fabric connector for the hub slots.
VPX Load Board

The Elma VPX load board is designed to be compliant with ANSI/VITA mechanical and electrical connection standards. Developed to enhance testing of VME systems, the load board aids the system designer in assuring adequate chassis cooling and verifying that the VME chassis is capable of meeting the power requirements of the system (or VITA specs).
VPX Serdes Test Blade

The DV3200 is an ultra low cost multi-lane Gbps serial test module that achieves unprecedented density and performance. The VPX test card vastly reduces the time, effort, and hardware investment needed to perform line card and backplane characterization of high-speed serial signals.
MicroTCA SerDes Test Module

The adoption of serial link technology in MicroTCA poses significant debug, characterization, and test challenges. The DMT1600 is an ultra low cost multi-lane Gbps serial test module that achieves unprecedented density and performance. With the DMT1600, you do not need to purchase equipment such as oscilloscopes, pattern generators, jitter analyzers, BERTs, clock generators, and analog function generators. The module allows the user to characterize the PCIe and SATA ports quickly and efficiently.
Extender Boards, RTMs, Adapters

Extender boards in VPX, VME64x, VME, cPCI, ATCA, VXS, MTCA, and VXI architectures. Designed to extend plug-in cards outside of the card cage area for easier testing. RTMs and adapters in various architectures. Form factor extenders in VME, VME64x.
Load and Serdes Test Boards

The load boards aid in verifying that the chassis can meet the power requirements of the system specifications, and helps the engineer locate hot spots in the chassis. The SerDes test modules directly evaluate true Gbps serial link BER performance inside the chassis.
System Management and Monitoring

Includes voltage, system, and shelf monitoring and management boards. Designed for various architectures.
Power Interface and Filler Boards

Power Interface Boards for pluggable power supply modules. Air blocker/filler boards that fill empty slots, jumper for busses like VME, and re-direct or contain airflow.
SBC - 3U CompactPCI Model # CAE027619


USB Controller Card - 3U CPCI Model # CAE022512


Plug-In PSU Module - 3U CPCI Model # CAE009301


Cabling Systems

Elma offers a VPX cabling system both deployed applications and test environments. Customized versions of the cable header shrouds can be designed for VXS systems. The cables are also offered for connecting our SerDes test units to VPX backplanes. An ATCA cabling system is also available for the testing the AdvancedTCA architecture.



International   |   About Elma   |   Contact Us   |   Send Feedback
© 2009 Elma Group, Inc. All rights reserved. Use of this website signifies your agreement to the Terms of Use.